BUILDING INSPECTOR / FIRE PROTECTION INSPECTOR

Code: 05582 Unknown Unknown

Official job specification

The text below is the official specification published by the New Jersey Civil Service Commission. The plain-language summary and analysis above are derived from it by NJ Civil Service Navigator. Source: the official specification page at NJ CSC.

Definition

Under direction, inspects new and existing buildings and structures to ensure compliance with the State Uniform Construction Code and enforces same to ensure public safety, health, and welfare; does related work as required.

Under direction, reviews plans and performs fire protection inspection work involved in enforcement of the State Uniform Construction Code, the fire protection subcode, and relevant fire protection laws within the concerned jurisdictions; does other related duties.

Examples of work

• Examines plans for new structures to ensure compliance with building subcodes.
• Inspects construction jobs, checks quality and amount of work completed, and resolves construction problems
• Enforces rules and regulations regarding building subcodes.
• Initiates legal action against violators of building subcodes.
• Prepares essential reports.
• Establishes and maintains essential records and files.
• May give assignments and instructions to employees.
• May make recommendations to superiors concerning disciplinary measures, promotions, and appointments of employees.
• Collects fees for the issuance of various permits and keeps records of same.
• Will be required to learn to utilize various types of electronic and/or manual recording and computerized information systems used by the agency, office, or related units.
• Examines and approves plans for fire protection work to see that they comply with the fire protection subcode of the Uniform Construction Code (UCC).
• Inspects and evaluates work in construction projects to ensure that all work and materials installed conform to approved plans and the fire protection subcode of the UCC and relevant fire protection laws/regulations.
• When violations of the fire protection subcode are found, determines the cause and takes corrective action.
• Gives testimony in court cases.
• Prepares recommendations regarding both temporary and final certificates of occupancy.
• Prepares reports.
• Establishes and maintains records and files.
• Will be required to learn to utilize various types of electronic and/or manual recording and information systems used by the agency, office, or related units.

License

Possession of a valid Building Inspector's License of the appropriate class issued by the New Jersey Department of Community Affairs.

Appointees will be required to possess a driver's license valid in New Jersey only if the operation of a vehicle, rather than employee mobility, is necessary to perform the essential duties of the position.

Possession of a valid license as a Fire Protection Inspector of the appropriate grade, issued by the New Jersey Department of Community Affairs. There are two (2) licenses issued based on the class structure to be reviewed, industrial and commercial (ICS), or high-rise and hazardous (HHS).

Appointees will be required to possess a driver's license valid in New Jersey only if the operation of a vehicle, rather than employee mobility, is necessary to perform essential duties of the position.

Knowledge, skills and abilities

• <i><u>RCS License</u></i>:
• Knowledge of structural design and analysis techniques necessary to check compliance with the State Uniform Construction Code particularly with regard to wood framing, light steel, and wall bearing systems which include foundation, wall, floor, and roof framing systems.
• Knowledge of basic material standards, codes, and enforcement requirements related to weatherability and durability of installed construction materials.
• Knowledge of basic fire protection requirements.
• Knowledge of basic inspection tools and test methods.
• Knowledge of organization and content of the State Uniform Construction Code.
• Knowledge of the preparation of violation notices and prescribed inspection record keeping.
• Knowledge of the classification of structures into class category.
• Ability to analyze and interpret provisions of the State Uniform Construction Code that apply to buildings and other laws, rules, regulations, and policies applicable to buildings
• Ability to carry out provisions of the State Uniform Construction Code as they relate to residential and small commercial structures.
• Ability to prepare building construction plans and specifications, and to review for accuracy and feasibility those prepared by others.
• Ability to work harmoniously with other municipal unit heads and with private contractors and architects.
• Ability to make investigations and inspections.
• Ability to prepare clear, sound, accurate, and informative reports of inspections and investigations containing findings, conclusions, and recommendations.
• Ability to keep essential records and files.
• Ability to prosecute violations of the building code by appearing in court.
• <i><u>ICS License</u></i>:
• The knowledge and abilities for an RCS license plus knowledge of requirements of the State Uniform Construction Code for class II construction plus:
• Knowledge of the organization and content of the State Uniform Construction Code regulations, organization, and content of building subcode.
• Knowledge of basic classification of structures into class categories. Knowledge of methods of systematic plans analysis.
• Knowledge of information pertaining to structural, architectural, mechanical, plumbing, fire protection, and electrical features of buildings which must be shown on plans to ensure compliance.
• Knowledge of code requirements related to fire divisions in buildings.
• Knowledge of design analyses methods to ensure that structural and mechanical elements of building depicted on plans do in fact conform to code requirements.
• Knowledge of field inspection and controlled inspection techniques to ensure that materials installed at construction sites are of same strength and quality as assumed by the design calculations and that they are installed in the manner required to achieve and preserve that strength.
• <i><u>HHS License</u></i>:
• The knowledge and abilities for an RCS and ICS license plus:
• Knowledge of advanced structural systems including structural design and analysis techniques necessary to check compliance with the code for the heavily loaded and technically advanced systems which characterize class I buildings.
• Knowledge of pile and other foundation systems used to bear very heavy loads.
• Knowledge of analysis of highrise framing systems including wind load and seismic considerations.
• Knowledge of fire protection systems requirements, standards, and design methods for exotic (nonwater) fire suppression system.
• Knowledge of compartmentation elevator, voice alarm, and other highrise fire safety systems including material and installation standards and methods for ensuring compliance with those standards.
• Knowledge of requirements for and design principals involved in various types of heating, ventilating, and air conditioning systems found in class I structures with particular emphasis on procedures ensuring adequacy of installation including fire protection requirements for such systems.
• <b>General ABILITIES:</b>
• Ability to analyze and interpret the State Uniform Construction Code, local building code, and other local ordinances that apply to buildings, and other laws, rules, regulations, and policies applicable to buildings.
• Ability to carry out provisions of the State Uniform Construction Code as they relate to residential and small commercial structures, industrial and commercial structures, and to highrise/hazardous structures.
• Ability to learn to utilize various types of electronic and/or manual recording and information systems used by the agency, office, or related units.
• Ability to read, write, speak, understand, or communicate in English sufficiently to perform the duties of this position. American Sign Language or Braille may also be considered as acceptable forms of communication.
• Persons with mental or physical disabilities are eligible as long as they can perform the essential functions of the job after reasonable accommodation is made to their known limitations. If the accommodation cannot be made because it would cause the employer undue hardship, such persons may not be eligible.
• CODE: 10/18/1996
• <b>FIRE PROTECTION INSPECTOR</b>
• There are two (2) classes of licenses, which are cumulative in terms of knowledge and abilities. The basic license (ICS) comprises the core knowledge and abilities for this title:
• Knowledge of the organization and content of Uniform Construction Code regulations and of the organization and content of the fire protection subcode.
• Knowledge of the fire protection subcodes background, purpose, history, place in local government structure, and relation to construction code enforcement programs at other levels of government.
• Knowledge of classification of structures into class categories.
• Knowledge of systems design and installation practices required by the UCC and/or its referenced standards for active/passive fire suppression, fire detection, and fire alarm systems sufficient to permit the review of plans to determine adequacy of the systems.
• Knowledge of basic fire protection requirements.
• Knowledge of height and area limitations.
• Knowledge of fire resistance ratings of structural components.
• Knowledge of arrangement, sizing, and protection of means of egress.
• Knowledge of flame spread and smoke generated requirements.
• Knowledge of combustibility of materials.
• Knowledge of requirements for installation of fire detection, alarm, and suppression systems.
• Knowledge of chimneys, flues, and vents.
• Knowledge of heating equipment and appliances.
• Knowledge of basic plan reading sufficient to perform duties of the position.
• Knowledge of testing methods, agencies, and test verification procedures incorporated in the code for combustibility and flame spread of materials.
• Knowledge of the use of basic inspection tools and test methods.
• Knowledge of the construction process for smaller buildings and the points at which inspection must be made.
• Knowledge of basic inspection report writing including preparation of violation notices and required inspection record keeping.
• Knowledge of the material requirements found in the electrical code.
• Knowledge of proper installation methods for all approved materials.
• Knowledge of the relationship of fire prevention codes which regulate use/occupancy of industrial and commercial buildings, and fire protection codes which regulate their construction.
• Knowledge of fire prevention code provisions, enforcement procedures, and objectives including the protection of places of assembly.
• Knowledge of the fire prevention code regulatory process which will ensure an understanding of the manner in which those fire hazards not regulation by the construction code can be regulated in the interest of public safety and fire protection.
• Knowledge of the information pertaining to structural, architectural, mechanical, fire protection, and electrical features of buildings which must be shown on the plans to ensure compliance with requirements of the code.
• Knowledge of analysis methods needed to ensure that fire protection elements of buildings depicted on plans do in fact conform to code requirements.
• Knowledge of field inspection and controlled inspection techniques necessary to ensure that materials installed at the construction site are of appropriate strength and quality.
• Ability to analyze and interpret the Uniform Construction Code.
• Ability to examine and approve plans for residential and small commercial structures.
• Ability to carry out field inspection activities for structures in classes I and II.
• Ability to organize assigned fire protection field inspections and investigative work and to make the required field visits/inspections/investigations.
• Ability to prepare detailed and technical correspondence.
• Ability to maintain records and files.
• Ability to compile factual fire safety data relating to a particular structure and prepare clear, sound, accurate, and detailed reports containing findings, conclusions, and recommendations for approval or disapproval.
• Ability to recognize approved materials found in the electrical code.
• Ability to understand standards and test methods which lead to approval.
• Ability to ensure that all materials are installed in accord with proper methods.
• The highest level license (HHS) incorporates all knowledge and abilities previously listed, and the following:
• Knowledge of fire protection material requirements established by the code including testing and listed procedures, and an understanding of test methods.
• Knowledge of code requirements related to fire divisions in buildings exceeding the height and area limitations established in the code.
• Knowledge of code requirements related to unlimited area buildings.
• Knowledge of design analysis methods needed to ensure that fire protection elements of buildings depicted on plans do in fact conform to code requirements.
• Ability to read, understand, and interpret test reports for both active/passive fire protection requirements of systems of the type required to be incorporated in class I buildings.
• Ability to utilize various types of electronic and/or manual recording and information systems used by the agency, office, or related units.
• Ability to read, write, speak, understand, and communicate in English sufficiently to perform duties of this position. American Sign Language or Braille may also be considered as acceptable forms of communication.
• Persons with mental or physical disabilities are eligible as long as they can perform essential functions of the job after reasonable accommodation is made to their known limitations. If the accommodation cannot be made because it would cause the employer undue hardship, such persons may not be eligible.
• CODE: 9/24/1999
• DUAL TITLE CODE: <b></b>

Note

The definition and examples of work for this title are for illustrative purposes only. A particular position using this title may not perform all duties listed in this job specification. Conversely, all duties performed on the job may not be listed.

The examples of work for this title are for illustrative purposes only. A particular position using this title may not perform all duties listed in this job specification. Conversely, all duties performed on the job may not be listed.